Step 1
Charge glucose meter with charger provided before first use.
Menu
Using your Telli Health Glucose Meter with Brook Remote Care
Step 2
Wash hands with soap and warm water before testing blood sugar to ensure accuracy.
Step 3
With clean hands, remove a test strip from vial. Do not bend, cut, or modify the test strips in any way.
Step 4
Insert test strip into meter’s test port – this will turn the meter on. Screen will display a flashing blood drop.
Step 5
Use lancet to prick the side of your fingertip. Squeeze finger slightly to create a bead, if necessary. Apply blood to absorbent hole of test strip.
Step 6
When enough blood has entered the test strip, a beep will occur and the test will begin. The results will show in 5 seconds.
That’s it! This glucose meter uses a cellular connection to Brook Remote Care, so you can use it right away and your results will automatically be logged for your clinic.
Important Notes:
- Don’t share you glucose meter with anyone else, as every test is sent to your clinic.
- Only use G-427B blood glucose test strips with this meter.
- Press “M” to select General mode (Control CTL mode is only used for testing calibration accuracy).
- The clock on your glucose meter will set itself after the first reading is logged.